Templates - APLITOP - Community https://community.aplitop.com/en/secciones/ Solutions for Surveying and Civil Engineering en-GB Fri, 08 May 2026 17:53:38 +0000 wpForo 60 Widening application on the platform https://community.aplitop.com/en/secciones/aplicacion-de-sobreanchos-en-la-plataforma/ Wed, 04 Aug 2021 07:18:05 +0000 How is the widening applied to the vectors of the road section?

]]> Templates admin https://community.aplitop.com/en/secciones/aplicacion-de-sobreanchos-en-la-plataforma/ Slopes. Soil - Terrain. Cut configuration. https://community.aplitop.com/en/secciones/taludes-tierra-vegetal-terreno-configuracion-de-corte/ Wed, 04 Aug 2021 06:59:46 +0000 How to indicate that the slopes, if there is topsoil, cut into the existing ground instead of topsoil.

]]> Templates admin https://community.aplitop.com/en/secciones/taludes-tierra-vegetal-terreno-configuracion-de-corte/ What is simple section stakeout for? https://community.aplitop.com/en/secciones/para_que_sirve_el_replanteo_de_seccion_sencilla/ Thu, 03 Jun 2021 10:00:00 +0000 This command is intended to easily stake out a road without having to define the segment file completely. It is ideal for stakeout of a section with the platform defined by a single vector and simple cut and fill slopes.

]]> Templates admin https://community.aplitop.com/en/secciones/para_que_sirve_el_replanteo_de_seccion_sencilla/ How are reinforcements defined? https://community.aplitop.com/en/secciones/como_se_definen_los_refuerzos/ Thu, 03 Jun 2021 10:00:00 +0000 First of all, it is necessary to have drawn the limits of the reinforcements in plan, in the PV layer. Next, the cross-sections must be obtained by cutting this layer, so that the pavement vertices are generated with the same PV code.

In the definition of the standard section, in the pavement section, the minimum and maximum dimensions of the reinforcement can be specified, which will be applied automatically if appropriate.

]]> Templates admin https://community.aplitop.com/en/secciones/como_se_definen_los_refuerzos/ What are the platform vector codes for? https://community.aplitop.com/en/secciones/para_que_sirven_los_codigos_de_los_vectores_de_la_plataforma/ Thu, 03 Jun 2021 10:00:00 +0000 These codes can be used to stake out specific vertices of the section, with the Setting out Lines command, and they will also be used in the drawing of the wireframe with the command Surfaces> Get Modified Terrain.

]]> Templates admin https://community.aplitop.com/en/secciones/para_que_sirven_los_codigos_de_los_vectores_de_la_plataforma/ How do you enter a section with a median? https://community.aplitop.com/en/secciones/como_se_introduce_una_seccion_con_mediana/ Thu, 03 Jun 2021 10:00:00 +0000 To define a road section with a median, it is necessary to execute the command Templates > Define/Edit. Within the definition of platforms, check the Enable box within the Medium frame.

Then specify the distances to the left and right of the alignment and the height of the median (usually negative).

]]> Templates admin https://community.aplitop.com/en/secciones/como_se_introduce_una_seccion_con_mediana/ What is the pivot for defining platforms? https://community.aplitop.com/en/secciones/para_que_sirve_el_pivote_en_la_definicion_de_plataformas/ Thu, 03 Jun 2021 10:00:00 +0000 The pivot in a platform is the point of application of the grade level and of the turn at the superelevations.

In most cases the pivot coincides with the alignment. In the case where the section contains a median, a pivot is usually defined on each side of the alignment.

]]> Templates admin https://community.aplitop.com/en/secciones/para_que_sirve_el_pivote_en_la_definicion_de_plataformas/ How can superelevation be controlled as a function of slope in certain vectors? https://community.aplitop.com/en/secciones/como_puede_controlarse_el_peralte_en_funcion_de_la_pendiente_en_determinados_vectores/ Thu, 03 Jun 2021 10:00:00 +0000 It is possible to control the behavior of the slope in the platform vectors by selecting the corresponding vector in the list and pressing the Edit button.

In the Platform Vector dialog you can use the Apply superelevations box, and by clicking the Conditions button you can decide whether the criterion should be the one set by the project superelevation table or is conditioned by the slope. In the latter case, a limit is established in percent, and it can be defined for slopes greater and less than said limit if you want to use a superelevation value equal to the slope or assign a specific value.

]]> Templates admin https://community.aplitop.com/en/secciones/como_puede_controlarse_el_peralte_en_funcion_de_la_pendiente_en_determinados_vectores/ Can ditches be inserted in embankment? https://community.aplitop.com/en/secciones/pueden_insertarse_cunetas_en_terraplen/ Thu, 03 Jun 2021 10:00:00 +0000 Yes. To do this it is necessary, within the command Templates > Define/Edit, in the category of ditches mark as Fill type.

]]> Templates admin https://community.aplitop.com/en/secciones/pueden_insertarse_cunetas_en_terraplen/ How can slopes with berms be defined? https://community.aplitop.com/en/secciones/como_pueden_definirse_taludes_con_bermas/ Thu, 03 Jun 2021 10:00:00 +0000 In the Templates > Define/Edit command, in Cut or Fill slopes tab, define the type of slope as Berm. Next, you need to specify the slope slope values and horizontal and vertical dimensions.

]]> Templates admin https://community.aplitop.com/en/secciones/como_pueden_definirse_taludes_con_bermas/